Hamamatsu Tango device
This is the reference documentation of the Hamamatsu Tango device.
you can also find some useful information about prerequisite/installation/configuration/compilation in the Hamamatsu camera plugin section.
Properties
Property name |
Mandatory |
Default value |
Description |
|---|---|---|---|
camera_number |
No |
0 |
The camera number, default is 0 |
frame_buffer_size |
No |
10 |
The DCAM frame buffer size used during the acquisition (see dcambuf_alloc) |
readout_speed |
No |
normal |
The readout speed, normal/slow (if supported by the camera model) |
Attributes
Attribute name |
RW |
Type |
Description |
|---|---|---|---|
frame_rate |
ro |
DevDouble |
The last computed frame per second (the value is computed every 100 frames only) |
lost_frames |
ro |
DevLong |
Number of frames lost during the current or last acquisition |
readout_speed |
rw |
DevString |
|
sensor_temperature |
ro |
DevDouble |
Sensor temperature (if supported by the camera model) |
(*) Use the command getAttrStringValueList to get the list of the supported value for these attributes.
Commands
Command name |
Arg. in |
Arg. out |
Description |
|---|---|---|---|
Init |
DevVoid |
DevVoid |
Do not use |
State |
DevVoid |
DevLong |
Return the device state |
Status |
DevVoid |
DevString |
Return the device state as a string |
getAttrStringValueList |
DevString: Attribute name |
DevVarStringArray: String value list |
Return the authorized string value list for a given attribute name |