Eiger Tango device ================== This is the reference documentation of the Dectris Eiger Tango device. you can also find some useful information about the camera models/prerequisite/installation/configuration/compilation in the :ref:`Dectris Eiger camera plugin ` section. Properties ---------- ==================== =============== =============== ========================================================================= Property name Mandatory Default value Description ==================== =============== =============== ========================================================================= detector_ip_address Yes N/A The ip address or the hostname of the detector computer interface http_port No 80 The http port number for control API stream_port No 9999 The port number for the data stream API ==================== =============== =============== ========================================================================= Attributes ---------- ========================= ======= ======================= ====================================================================== Attribute name RW Type Description ========================= ======= ======================= ====================================================================== auto_summation rw DevString If enable image depth is bpp32 and, if not image depth is bpp16 **(\*)** cam_status ro DevString The internal camera status compression_type rw DevString For data stream, supported compression are: - NONE - LZ4 - BSLZ4 countrate_correction rw DevString Enable or disable the countrate correction **(\*)** efficency_correction rw DevString Enable the efficienty correction flatfield_correction rw DevString Enable or disable the internal (vs. lima) flatfield correction **(\*)** humidity ro DevFloat Return the humidity percentage pixel_mask rw DevString Enable or disable the pixel mask correction **(\*)** photon_energy rw DevFloat The photon energy,it should be set to the incoming beam energy. Actually it’s an helper which set the threshold plugin_status ro DevString The camera plugin status serie_id ro DevLong The current acquisition serie identifier stream_last_info ro DevString Information on data stream, encoding, frame_dim and packed_size stream_stats ro DevDouble ave_size, ave_time, ave_speed threshold_energy rw DevFloat The threshold energy, it will set the camera detection threshold. This should be set between 50 to 60 % of the incoming beam energy. temperature ro DevFloat The sensor temperature virtual_pixel_correction rw DevString Enable or disable the virtual-pixel correction **(\*)** ========================= ======= ======================= ====================================================================== **(\*)** These attributes can take as value **ON** or **OFF**. Please refer to the Dectris documention for more information regarding the online corrections. Commands -------- ======================= =============== ======================= =========================================== Command name Arg. in Arg. out Description ======================= =============== ======================= =========================================== deleteMemoryFiles DevVoid DevVoid To remove the temporary mem. files initialize DevVoid DevVoid To initialize the detector latchStreamStatistics DevBoolean DevVarDoubleArray: If True, reset the statistics - ave_size, - ave_time, - ave_speed Init DevVoid DevVoid Do not use State DevVoid DevLong Return the device state Status DevVoid DevString Return the device state as a string getAttrStringValueList DevString: DevVarStringArray: Return the authorized string value list for Attribute name String value list a given attribute name ======================= =============== ======================= ===========================================