Frelon Tango device ======================= This is the reference documentation of the Frelon Tango device. you can also find some useful information about the camera models/prerequisite/installation/configuration/compilation in the :ref:`Frelon camera plugin ` section. Properties ---------- =============== =============== =============== ============================================================== Property name Mandatory Default value Description =============== =============== =============== ============================================================== espia_dev_nb No 0 The acquisition Espia board number =============== =============== =============== ============================================================== Attributes ---------- ======================= ======= ======================= =========================================================== Attribute name RW Type Description ======================= ======= ======================= =========================================================== espia_dev_nb ro DevString The Espia board number. image_mode rw DevString The acquisition image mode: - **Frame transfert** - **Full frame** input_channel rw DevString The Inputs ADC channels: - **1** - **2** - **3** - **4** - **1-2** - **3-4** - **1-3** - **2-4** - **1-2-3-4** e2v_correction rw DevString Active/Desactive the corrstion for e2v cameras: - **On** - **Off** roi_mode rw DevString The roi mode: - **None** - **Slow** - **Fast** - **Kinetic** roi_bin_offset rw DevLong The roi offset in line spb2_config rw DevString The internal config for pixel rate, **precision** or **speed**. Depending on your camera model, the pixel rates are factory defined seq_status ro DevLong ======================= ======= ======================= =========================================================== Please refer to the *Frelon User's Guide* for more information about the above specfic configuration parameters. Commands -------- ======================= =============== ======================= =========================================== Command name Arg. in Arg. out Description ======================= =============== ======================= =========================================== Init DevVoid DevVoid Do not use State DevVoid DevLong Return the device state Status DevVoid DevString Return the device state as a string getAttrStringValueList DevString: DevVarStringArray: Return the authorized string value list for Attribute name String value list a given attribute name execSerialCommand DevString DevString Send a command through the serial line command command result resetLink DevVoid DevVoid reset the espia link ======================= =============== ======================= ===========================================