Dhyana Tango device ======================== This is the reference documentation of the Dhyana Tango device. you can also find some useful information about the camera models/prerequisite/installation/configuration/compilation in the :ref:`Dhyana camera plugin ` section. Properties ---------- ======================== =============== ================================= ===================================== Property name Mandatory Default value Description ======================== =============== ================================= ===================================== internal_trigger_timer No 999 Soft timer to generate software trigger in millisecond. temperature_target No n/a To start cooling the detector (C) trigger_mode No STANDARD Tucam trigger mode: * STANDARD * GLOBAL * SYNCHRONOUS trigger_edge No RISING To set the trigger level: * RISING * FALLING ======================== =============== ================================= ===================================== Attributes ---------- ======================= ======= ======================= ====================================================================== Attribute name RW Type Description ======================= ======= ======================= ====================================================================== global_gain rw DevString Global gain setting on the sensor, HDR, HIGH or LOW fan_speed rw DevUShort FAN speed for cooling, from 0 to 10 temperature ro Devdouble Temperature of the sensor temperature_target rw Devdouble Temperature target firmware_version ro DevString Firmware version tucam_version ro DevString TUCAM SDK version trigger_mode rw DevString Tucam trigger mode: STANDARD, GLOBAL or SYNCHRONOUS trigger_edge rw DevString To set the input trigger level: RISING or FALLING ======================= ======= ======================= ====================================================================== Commands -------- ======================= ======================== ======================= =========================================== Command name Arg. in Arg. out Description ======================= ======================== ======================= =========================================== Init DevVoid DevVoid Do not use State DevVoid DevLong Return the device state Status DevVoid DevString Return the device state as a string getAttrStringValueList DevString: DevVarStringArray: Return the authorized string value list for Attribute name String value list a given attribute name ======================= ======================== ======================= ===========================================