Maxipix Tango device ===================== This is the reference documentation of the Maxipix Tango device. you can also find some useful information about the camera models/prerequisite/installation/configuration/compilation in the :ref:`Maxipix camera plugin ` section. Properties ---------- ===================== =============== =============== ============================================================== Property name Mandatory Default value Description ===================== =============== =============== ============================================================== config_name Yes N/A The configuration name config_path Yes N/A The configuration directory path where the files are available espia_dev_nb No 0 The acquisition Espia board number reconstruction_active No True Activate the reconstruction or not fill_mode No Raw the chip-gap filling mode, **Raw**, **Zero**, **Dispatch** or **Mean**. gate_level No High_Rise The Input gate level, **High_rise** or **Low_Fall** gate_mode No Inactive The gate mode, **Inactive** or **Active** ready_level No High_Rise The output ready level, **High_rise** or **Low_Fall** ready_mode No Exposure The output Ready mode, **Exposure** or **Exposure_Readout** shutter_level No High_Rise The output Shutter level, **High_rise** or **Low_Fall** trigger_level No High_Rise The output Trigger level, **High_rise** or **Low_Fall** ===================== =============== =============== ============================================================== Attributes ---------- ======================= ======= ======================= =========================================================== Attribute name RW Type Description ======================= ======= ======================= =========================================================== config_name rw DevString the configuration name. If changed the detector is reconfigured and reset. config_path rw DevString the configuration directory path where the files are available energy_calibration rw Spectrum The energy calibration, [0] = threshold setpoint , [1] DevDouble threshold step-size (keV) energy_threshold rw DevDouble The threshold in energy (keV) threshold rw DevDouble The detector threshold threshold_noise rw Spectrum The threshold noise of each chip, [0] =chip0 thl, [0] = DevDouble chip1 thl, .... espia_dev_nb rw DevString The Espia board number. fill_mode rw DevString The chip-gap filling mode: - **Raw**, the border pixel values are copied - **Zero**, border and gap pixel are set to zero - **Dispatch**, the border pixel values are interpolated over the full gap - **Mean**, the gap pixels are filled with the border pixels average value. gate_level rw DevString The Input gate level: - **High_rise** - **Low_Fall** gate_mode rw DevString The gate mode: - **Inactive** - **Active** ready_mode rw DevString The output Ready mode: - **Exposure** - **Exposure_Readout** shutter_level rw DevString The output Shutter level - **High_rise** - **Low_Fall** trigger_level rw DevString The output Trigger level: - **High_rise** - **Low_Fall** dac_possible ro DevString[] Return the list of the the possible dac names dac_name rw DevString The dac name to be write/read (dac_value) dac_value rw DevLong The dac value of the given dac_name dac register ======================= ======= ======================= =========================================================== **Warning**: we recommend to not change the DAC register values (dac_name and dac_value attributes) excepted if you well know what you are doing, if you have some troubles with the detector please contact the ESRF Detector Unit first. Commands -------- ======================= =============== ======================= =========================================== Command name Arg. in Arg. out Description ======================= =============== ======================= =========================================== Init DevVoid DevVoid Do not use State DevVoid DevLong Return the device state Status DevVoid DevString Return the device state as a string getAttrStringValueList DevString: DevVarStringArray: Return the authorized string value list for Attribute name String value list a given attribute name ======================= =============== ======================= ===========================================