Pixirad Tango device¶
This is the reference documentation of the Pixirad Tango device.
you can also find some useful information about the camera models/prerequisite/installation/configuration/compilation in the Pixirad camera plugin section.
Properties¶
Property name |
Mandatory |
Default value |
Description |
---|---|---|---|
ip_address |
Yes |
N/A |
The ip address or the hostname of the detector computer interface |
port_number |
No |
6666 |
The port number for detector (DAQ commmands) |
initial_model |
No |
PX8 |
Model type PX1, PX2 or PX8 |
Attributes¶
Attribute name |
RW |
Type |
Description |
---|---|---|---|
high_threshold0 |
rw |
DevDouble |
High Energy threshold 0 (KeV) |
low_threshold0 |
rw |
DevDouble |
Low Energy threshold 0 (KeV) |
high_threshold1 |
rw |
DevDouble |
High Energy threshold 1 (KeV) |
low_threshold1 |
rw |
DevDouble |
Low Energy threshold 1 (KeV) |
dead_time_free_mode |
rw |
DevString |
|
cooling_temperature_setpoint |
rw |
DevDouble |
Cooling temperature setpoint for the peltier module of the detector |
high_voltage_biais |
rw |
DevDouble |
Bias tension for the high voltage in manual mode |
high_voltage_delay_before_on |
rw |
DevDouble |
Delay for the hv before acquisition |
h_v_refresh_period |
rw |
DevShort |
How many image before hv is reset |
delay_between_frames |
rw |
DevShort |
Delay between frame in loop acquisition (millisecond) |
color_mode |
rw |
DevString |
|
sensor_config_build |
rw |
DevString |
|
trsf_mode |
rw |
DevString |
|
h_v_bias_mode_power |
rw |
DevBoolean |
Enable (True) or disable (False) the high voltage |
hybrid_mode |
rw |
DevString |
CDTE or GAAS |
temperature_peltier_cold |
rw |
DevDouble |
Temperature of the peltier (live) cold surface in Celsuis |
temperature_peltier_hot |
rw |
DevDouble |
Temperature of the peltier (live) Hot surface in Celsuis |
high_voltage_tension |
rw |
DevDouble |
The tension of the High Voltage in Volt |
box_humidity |
ro |
DevDouble |
The moisture level in the detector box |
box_temperature |
ro |
DevDouble |
The temperature in the detector box in Celsuis |
peltier_power |
ro |
DevDouble |
The percentage of peltier power |
alarm_temp_too_hot |
ro |
DevBoolean |
The temperature is too hot alarm |
alarm_temp_too_hot_enabled |
ro |
DevBoolean |
The Alarm <<Temperature is too hot>> is enabled or not (is watched or not) |
alarm_temp_too_cold |
ro |
DevBoolean |
The temperature is too cold alarm |
alarm_temp_too_cold_enabled |
ro |
DevBoolean |
The Alarm <<Temperature is too cold>> is enabled or not (is watched or not) |
alarm_humidity |
ro |
DevBoolean |
The humidity is too high |
alarm_humidity_enabled |
ro |
DevBoolean |
The Alarm <<Humidity>> is enabled or not (is watched or not) |
Please refer to the Pixirad documention for more information on parameter meanings.
Commands¶
Command name |
Arg. in |
Arg. out |
Description |
---|---|---|---|
Init |
DevVoid |
DevVoid |
Do not use |
State |
DevVoid |
DevLong |
Return the device state |
Status |
DevVoid |
DevString |
Return the device state as a string |
getAttrStringValueList |
DevString: Attribute name |
DevVarStringArray: String value list |
Return the authorized string value list for a given attribute name |